Spraying manipulator
SX - 02 two axis spraying manipulator is my company combined with decades of thermal spraying application experience of research and manufacture for thermal spraying industry use gun operating mechanism.
But on the ignition position, the spray position, spraying range teach programming. For spraying pass, gun movement speed and spraying parameters set programming.
Movement speed points high low gear control.
Can choose the third axis and linkage function.
Can be optional ceiling type installation.
Hold the force |
16 kilograms
|
Horizontal axis stroke |
1600 mm (user requirements can be extended to 20 meters)
|
Horizontal axis movement speed |
0 to 600 mm/SEC
|
Vertical stroke |
600 mm (user requirements can be extended to 1.5 meters)
|
Vertical movement speed |
0 to 400 mm/SEC
|