HVOF equipment SX-5000w
The principal of SX-5000 HVOF equipment is: the mixture gas of oxygen and fuel gas is sent to the burning area of spray gun exit under high pressure. Then the burning gas is accelerated to form a supersonic flame with the help of peripheral compressed air. The spray powder is sent into burning flame and make a functional coating.
SX-5000 consists of spray gun, powder feeding machine, control system, heat-exchanger system and pipeline system. It’s a compact equipment with the traits of easy-operating, stable working performance, low fuel consumption and high-quality coating.
Control system
Spray gun
Spray gun with manual and machine fixed way of operation. Gas needed: oxygen and propane (C3H8), weight: 2kg. velocity of spray particles: ≥450m/s. It can work a long time stably.
Parameters of SX-5000
|
number |
item |
parameter |
|
1 |
Flame velocity |
2100m/s |
|
2 |
Flame temperature |
2700℃ |
|
3 |
Spray gun power |
100KW |
|
4 |
Spray particles velocity |
500~600m/s |
|
5 |
cooling |
Water cooling |
|
6 |
Cooling water-flow |
9.5L/min |
|
7 |
Coating porosity |
<1% |
|
8 |
Coating strength |
>70MPa |
|
9 |
Powder measurement |
5-120μm |
|
10 |
Fuel gas(C3H8)pressure and flow |
0.65MPa 88L/min |
|
11 |
Oxygen pressure and flow |
11MPa 305L/min |
|
12 |
Air pressure and flow |
0.75MPa 440L/min |
|
13 |
nitrogen pressure and flow |
1 .2MPa 18 L/min |
|
14 |
Hydrogen pressure |
0.35MPa |
|
15 |
Spray gun outside measurement |
420×230×50 |
|
16 |
Spray gun weight |
2.8Kg |
|
Powder feeding machine
The SX-5000 powder feeding machine is used to store spray powder and send them to burning flames according to technological requirements. The feeding gas is nitrogen, which pulverizes the powder and sends the pulverized particles along with the gas to spray gun. You can regulate the feeding velocity by the localizer on the regulating control panel. |
The SX-5000 powder feeding machine is used to store spray powder and send them to burning flames according to technological requirements. The feeding gas is nitrogen, which pulverizes the powder and sends the pulverized particles along with the gas to spray gun. You can regulate the feeding velocity by the localizer on the regulating control panel.
Parameters of the feeding machine
|
number |
item |
parameter |
|
1 |
Feeding pattern |
Pulverizing and gas pressure |
|
2 |
Volume of single can |
3.0L |
|
3 |
Feeding gas |
nitrogen |
|
4 |
Pressure of feeding gas |
1.1-1.3MPa |
|
5 |
Feeding velocity |
0~160g/min |
|
6 |
Feeding accuracy |
±1% |
|
7 |
Feeding gas flow |
400-800L/h |
|
8 |
Outside measurement of feeding machine |
500×460×1300mm |
|
9 |
Weight of feeding machine |
50Kg |
